Specification
Type |
Output Port |
Frequency |
Radius range |
|
Type A Europe and Middle east Market |
GSM800 |
869-894Mhz |
5-15M @ depending on the mobile service provider’s network condition |
|
GSM900 |
925-960 MHz |
|||
GSM1800 |
1805-1880 MHz |
|||
3G |
2110-2170Mhz |
|||
Type B American and Asia Market |
CDMA800 |
850-894Mhz |
5-15M @ depending on the mobile service provider’s network condition |
|
GSM |
925-960 MHz |
|||
DCS PHS |
1805-1990 MHz |
|||
3G |
2110-2170Mhz |
|||
Power supply: AC110-240V 12V |
Built-in Battery: 1800mA/h |
|||
Total output Power: 2 watt System: Nextel, AMPS, TACS, NMT, GSM, DCS, CDMA, PDC, TDMA, PHS, IDEN, 3G, UMTS Built-in battery time : 1 hour Signal source: Synthesized Operation Temperature: -10℃ to +50℃ Humidity: 5% to 80%
Feature and Advantage: 2. Each band can work separately or simultaneously. 3. Wind slots on two sides and inside coolers make a constant cooling working. |
Note:
1. Be sure to connect all the antennae before the power supply is switch on.
2. When you get the device in the first time,recharge the device only after the power is used out.To prolong the lifespan of the device, try to recharge it no less than 12 Hours.
3. Any sealed mark on the machine teared are void, excluding from the repaired service.
4. Don’t put the jammer in the water and fire to avoid using in the bad, Condition of over-wet, over-hot, high voltage and high magnetism.
5. Antennae shall be used vertical to the ground, working more efficiently.